2010-05-27

Protocol Analyzer 1.1

Finally, Protocol Analyzer 1.1 is released! It contains a lot of goodies like the Pulse distribution view, Pulse re-anayzing and CUL support – see the release notes for all details. A big thanks to the beta testers for test and feedback! The release now also includes a manual for the program.
Posted by at
Labels: , ,

6 comments:

  1. benDecember 31, 2012 at 7:11 AM

    Is it possible to analyze ir from a remote using a simple ir capture device such as this:

    http://www.compendiumarcana.com/irwidget/

    ReplyDelete
    Replies
    1. NetHomeServerDecember 31, 2012 at 3:40 PM

      No, not currently. the irwidget has a built in CPU and communicates with a serial port to the host computer using a proprietary protocol (that I don't have the specs for). The Analyzer uses the microphone input and does not require any external CPU, just an IR-module and some resistors to get the signal level right.

      Delete
  2. -=Pascal=-January 10, 2013 at 11:51 PM

    Hello,
    Is it possible to recover the source of Protocol Analyzer?
    I want to add a protocol decoding a generic weather station.
    thank you :-)

    ReplyDelete
  3. NetHomeServerJanuary 13, 2013 at 12:06 PM

    Pascal, Send me a mail (the address is on http://wiki.nethome.nu/doku.php/nethomeservercurrentstate) so can we discuss how to proceed

    ReplyDelete
  4. UnknownApril 12, 2013 at 9:25 PM

    Hello,
    First of all I wanted to thank you for such a great yet simple tool.

    As you know, most simple way to capture ir signal is simply to solder an photoresistor (which are found almost everywhere) to mic cable.
    But I have one little problem- since resistors I have are higher-resitance positive I get inverted signal. Which is still very usefull, but decoding signals isn't possible on-the fly this way (i get bunch of faulty decoded codes instead of one right).

    Can you maybe add one small checkbox to actually invert incoming signal before decoding it? I know it can be HW resolved, but why bother with extra components when quality of the signal with 1 photoresistor is good, only inverted?

    Thanks in advance

    ReplyDelete
  5. NetHomeServerApril 13, 2013 at 4:56 PM

    Thank you! I have added an "invert"-option in the settings now. I put up a temporary prerelease for you on: http://wiki.nethome.nu/doku.php/beta where you can try it out. Tell me if it works as you expected. In this release you can also write your own decoder-plugins for the analyzer.

    ReplyDelete

Subscribe to: Post Comments (Atom)